Epson Artisan 730 - Overview

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
Artisan 837/730/PX830FWD/PX730WD/TX730WD Overview 284
Confidential
9.1 Overview
Artisan 837/730/PX830FWD/PX730WD/TX730WD and Artisan 810/835/710/725/
PX810FW/TX810FW/PX820FWD/TX820FWD/PX710W/TX710W/PX720WD/
TX720WD use similar mechanisms, and basically common to each other. Therefore,
most of the information in prior chapters can apply to Artisan 837/730/PX830FWD/
PX730WD/TX730WD.
This chapter describes information on Artisan 837/730/PX830FWD/PX730WD/
TX730WD.
Follow the instructions below to get the information on Artisan 837/730/PX830FWD/
PX730WD/TX730WD.
INSTRUCTIONS FOR ARTISAN 837/730/PX830FWD/PX730WD/TX730WD
C H E C K
P O I N T
In this chapter, the product names are called as follows:
Notation Product name
Artisan 810/PX810FW/
TX810FW
Epson Artisan 810/Epson Stylus Photo
PX810FW/Epson Stylus Photo TX810FW
Artisan 710/PX710W/
TX710W
Epson Artisan 710/Epson Stylus Photo
PX710W/Epson Stylus Photo TX710W
Artisan 835/PX820FWD/
TX820FWD
Epson Artisan 835/Epson Stylus Photo
PX820FWD/Epson Stylus Photo TX820FWD
Artisan 725/PX720WD/
TX720WD
Epson Artisan 725/Epson Stylus Photo
PX720WD/Epson Stylus Photo TX720WD
Artisan 837/PX830FWD
Epson Artisan 837/Epson Stylus Photo
PX830FWD
Artisan 730/PX730WD/
TX730WD
Epson Artisan 730/Epson Stylus Photo
PX730WD/Epson Stylus Photo TX730WD
Category Description
Features and
specifications
 New exterior design with Front Cover
 Automatic Front Cover Open function using a plunger which can
prevent the situation the cover is closed when ejecting paper
 New specifications of Scanner Open Sensor
 With newly mounted Document Cover Open Sensor, the panel menu
automatically shifts to the scan mode if ADF or the document cover is
opened.
For features and specifications other than those above, see “Comparison
Table (TBD)”.
Operation
principles
See description in Chapter 2 "OPERATING PRINCIPLES" (p.48).
However, the configuration of the motors and sensors differs from that for
the others. For the details, see
" 9.2.1 Motors & Sensors" (p.285). The
power-on sequence is the same as that of Artisan 835/725/PX820FWD/
TX820FWD/PX720WD/TX720WD. (See " 8.2.1 Power-On Sequence"
(p.255).)
Troubleshooting
See description in Chapter 3 "TROUBLESHOOTING" (p.60). However,
the description related to the AID function is not necessary for Artisan 837/
730/PX830FWD/PX730WD/TX730WD because it is not equipped with
the AID function.
For the troubleshooting for Artisan 837/730/PX830FWD/PX730WD/
TX730WD other than provided above, see " 9.3 Troubleshooting" (p.287).
Disassembly/
reassembly
procedures
See description in " 9.4 Disassembly/assembly" (p.288) for disassembling/
assembling because the procedures for some parts differ between models.
Required
adjustments
See description in " 9.5 Adjustment" (p.321) and make the specified
adjustments because some adjustments/inspections for Artisan 837/730/
PX830FWD/PX730WD/TX730WD differ from those for the others.
Maintenance
information
The maintenance information is the same as that of Artisan 835/725/
PX820FWD/TX820FWD/PX720WD/TX720WD, therefore, see
" 8.5
Maintenance" (p.281).
The lubrication points are the same as those of Artisan 810/710/PX810FW/
TX810FW/PX710W/TX710W. (See " 6.1.3 Lubrication" (p.243).)
Connector
summary/
exploded
diagram/parts
list
See " 9.6 Connector Summary" (p.327) for the connector summary for
Artisan 837/730/PX830FWD/PX730WD/TX730WD.
This manual does not provide the exploded diagrams or the parts list. For
such information, see SPI (Service Parts Information).