Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
PRODUCT DESCRIPTION Scanner Specifications 22
Confidential
1.2.5 Printing Area
The printing area for this printer is shown below.
Note * : The margins for Borderless print are margins that bleed off the edges of paper.
Figure 1-1. Printing Area
1.3 Scanner Specifications
Note * : When scanning using ADF
Table 1-7. Printing Area (Margins)
Print Mode Paper Size
Margin
*
Left Right Top Bottom
Standard print
Any size
3 mm 3 mm 3 mm 3 mm
Envelope
5 mm 5 mm 3 mm 20 mm
Borderless
print
4” x 6”
2.54 mm 2.54 mm
1.34 mm 2.54 mm
Others
2.96 mm 4.02 mm
Print Area
LM RM
TM
BM
BM
Cut Sheet (Standard)
Cut Sheet (Borderless)
Paper SIze
LM
RM
TM
BM
Print Area
LM
RM
Print Area
Envelope
Paper Size
TM
Paper Feed Direction
Table 1-8. Basic Specifications
Item
Specification
Epson Artisan 810/Epson
Stylus Photo PX810FW/
TX810FW
Epson Artisan 710/Epson
Stylus Photo PX710W/
TX710W
Scanner type Flatbed, color
Scanning method Moving carriage, stationary document
Home position The rear left corner
Photoelectric device CIS
Light source LED
Maximum document sizes A4 or US letter
Scanning range 8.5” x 11.7” (216 mm x 297 mm)
Maximum resolution
Main scan : 4,800 dpi
(1,200 dpi
*
)
Sub scan : 4,800 dpi
(600 dpi
*
)
Main scan : 2,400 dpi
Sub scan : 4,800 dpi
Maximum effective pixels 40,800 x 56,160 pixels
20,400 x 28,080 pixels
(with 2,400 dpi scanning)
Pixel depth 16 bit per pixel (input) and 1 bit or 8 bit per pixel (output).
Table 1-9. ADF Specifications
(Epson Artisan 810/Epson Stylus Photo PX810FW/TX810FW only)
Item Specification
Document loading Face-up
Maximum document sizes A4 or US letter or Legal
Supported paper type Plain paper only
Paper thickness 64 to 95 g/m
2
Maximum number of
documents which can be set
30 sheets (Xerox-P 64 g/m2) or 3 mm (A4, US Letter) /
10 sheet (Legal)
Document path Feeds from upper tray and ejects to lower tray
Document set position Left back