Epson Artisan 730 - Supported File Type and Media Type; Automatic Detection of Images in Memory Card; Specifications for Handling Image Data

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
PRODUCT DESCRIPTION Specification for Each Function 34
Confidential
1.7.2.2 Supported File Type and Media Type
The followings describe the file system, media format, and file type supported by the
memory card direct function.
Note *1: Refer to the Camera File System Standard; “DCF Version 2.0, JEIDA-CP-3461” for
more details.
*2 : FAT32 is not specified in the xD-Picture card standards. This printer supports only
reading of xD-Picture card formatted in FAT32.
*3 : DVD that is formatted with only UDF is not supported.
1.7.2.3 Automatic Detection of Images in Memory Card
When a memory card is inserted in the card slot on the printer, or when a memory card
is detected at power-on, the printer automatically searches for all images stored in the
card. When the card is removed, the printer erases the information on the all detected
files.
1.7.2.4 Specifications for Handling Image Data
Table 1-32. Supported File System, Types and Media Format
Item Specification
File system
• DCF Version 1.0 or 2.0
*1
compliant.
• “Backup” or “Scan in Memory” form created by this printer
Other than those does not ensure proper operation. File
systems available with the card reader function are restricted
by the host’s specification.
Media format
Memory card
• DCF Version 1.0 or 2.0 compliant
• DOS FAT format (FAT12/FAT16/FAT32
*2
) with single
partition (basic partitioned)
CD-R ISO9660 Level1 (Joliet) format
DVD-R
• ISO9660 Level1 (Joliet) format
• ISO9660 Level1 (Joliet) and UDF Bridge format
*3
File type
JPEG (*.JPG)
Image files conform to Exif Version 2.21. (Exif version 1.0/
2.0/2.1/2.2/2.21 are supported)
Camera
definition file
(*.MRK)
Camera definition files used for DPOF mode.
Valid if the full pass of the “AUTPRINT.MRK” is within 32
letters.
P.I.F
definition file
(*.USD)
Print layout definition files compliant with PRINT Image
Framer Rev.2.1 specifications. Files in “/EPUDL/” directory
are valid.
P.I.F
definition file
(*.FD2)
Print layout definition files compliant with PRINT Image
Framer Rev.3.1 specifications. Files in a memory card are
valid.
C H E C K
P O I N T
The printer does not detect any files stored under the following
directories or their sub-directories.
• Directories containing system properties or hidden properties.
• “RECYCLED” (Windows directory for deleted files)
• “PREVIEW” (directories of CASIO DSC for thumbnail images)
• “SCENE” (directories of CASIO DSC for its Best Shot function)
• “MSSONY” (directories of SONY DSC for e-mail images, voice memos,
movies, or non-compressed images)
• “DCIM\ALBUM\IMAGE” (directories of CASIO DSC for its album
function)
Table 1-33. Specifications for Handling Image Data
Item Specification Remarks
Image size (pixel)
• Horizontal: 80 ≤ X ≤ 9200
• Vertical: 80 ≤ Y ≤ 9200
---
Maximum number
of images
Up to 9,990 images When a memory card stores 9,990
or more images, the first 9,990
images are detected and become
valid in the printer. The detecting
order varies depending on the
folder configuration in the card, so
which images are included in the
first 9,991 cannot be defined.
However, images specified by
camera definition files can be
selected to be printed even when
the total number of images has
exceeded 9,990. Up to 999 camera
defined image files can be
specified.
Maximum number
of copies
99 copies for each image.
Up to 999 sheets in total.
---