Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
PRODUCT DESCRIPTION Interface 25
Confidential
1.5 Interface
The following is the specifications of the USB Interface, Network Interface, FAX
Interface (Epson Artisan 810/Epson Stylus Photo PX810FW/TX810FW only), and
Memory Card Slot mounted on this printer.
1.5.1 USB Interface
The table below describes the specifications of the two USB ports; USB device port for
connecting with a host such as a computer, and the USB host port for connecting with
an external devices such as a DSC (digital still camera).
Note* : The following devices can be connected to the USB Host port.
• Devices compliant with DPS Version 1.0/1.1 (PictBridge)
• Devices compliant with Universal Serial Bus Mass Storage Class Bulk-Only Transport
Revision 1.0, and the Subclass code is one of the followings.
0x06 (SCSI transparent command set)
0x05 (SFF-8070i command set)
0x02 (SFF-8020i command set)
Note : The “Model Name” is replaced as shown in the following table.
1.5.2 FAX Interface (Epson Artisan 810/Epson Stylus
Photo PX810FW/TX810FW only)
1.5.3 Network Interface
Epson Artisan 810/Epson Stylus Photo PX810FW/TX810FW/Epson Artisan 710/
Epson Stylus Photo PX710W/TX710W
can be connected to the network via Wired
or Wireless LAN connectio
n, however, they can not be used simultaneously.
The following describes each Interface.
Wired LAN
The following interface is equipped for the Wired LAN connection. The communication
mode can be selected from auto setting or fixed setting.
Note* : 10Base-T/100Base-TX Ethernet is supported. MDI/MDI-X is selected automatically.
Table 1-13. USB Interface Specifications
Item USB Device port USB Host port*
Compatible standards
• Universal Serial Bus
Specifications Revision 2.0
• Universal Serial Bus Device
Class Definition for Printing
Devices Version 1.1
• Universal Serial Bus Mass
Storage Class Bulk-Only
Transport Revision 1.0
• Universal Serial Bus
Specifications Revision 2.0
Transfer rate
480 Mbps (High Speed) 480 Mbps (Max.)
Data format
NRZI
Compatible connector
USB Series B USB Series A
Max. cable length
2 [m] or less
Table 1-14. Device ID
When IEEE 1284.4 is Enabled When IEEE 1284.4 is Disabled
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC,D4,D4PX, ESCPR2;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
CID:EpsonRGB;
@EJL<SP>ID<CR><LF>
MFG:EPSON;
CMD:ESCPL2,BDC, ESCPR2;
MDL:Model Name;
CLS:PRINTER;
DES:EPSON<SP>Model Name;
CID:EpsonRGB;
Table 1-15. Model Names Indicated in the Device ID
Destination
Model Name
Epson Artisan 810/Epson
Stylus Photo PX810FW/
TX810FW
Epson Artisan 710/Epson
Stylus Photo PX710W/
TX710W
North America Artisan 810 Artisan 710
Euro Epson Stylus Photo PX810FW Epson Stylus Photo PX710W
Asia/Pacific Epson Stylus Photo TX810FW Epson Stylus Photo TX710W
Port Name Connector Description
Line port RJ11 Connects to phone cable from modular wall jack.
EXT port RJ11 Connects to TAM or Telephone.
Table 1-16. Wired LAN
Item Content
Connector RJ-45 receptacle
*
: 1 port
Communication Speed For either 10Base-T or 100Base-TX, the Full Duplex or Half
Duplex can be selected.
To Next Page
Loading...
