Epson Artisan 730 - Decoration Plate Left Upper;Decoration Plate Left Upper Sub

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
Artisan 837/730/PX830FWD/PX730WD/TX730WD Disassembly/assembly 308
Confidential
9.4.2.16 Decoration Plate Left Upper/Decoration Plate Left Upper Sub
 Parts/Components need to be removed in advance:
Scanner Unit
 Removal procedure
1. Lift the front side of the Decoration Plate Left Upper slightly to release the
dowel (x1) and slide the Decoration Plate Left Upper in the direction of the
arrow to release the hooks (x2) of the Decoration Plate Left Upper, and then
remove the Decoration Plate Left Upper from the Decoration Plate Left Upper
Sub.
Figure 9-39. Removing the Decoration Plate Left Upper (1)
When installing the Scanner Decoration Plate Front, align the ribs
(x5) of the Scanner Decoration Plate Front shown in
Fig. 9-38 with
the holes (x5) of the Scanner Upper Housing.
Figure 9-38. Installing the Scanner Decoration Plate Front
Rib
Scanner Upper Housing
C H E C K
P O I N T
This section describes the disassembly/reassembly procedures of the
Decoration Plate Left Upper/Decoration Plate Left Upper Sub for
Artisan 730/PX730WD/TX730WD.
The disassembly/reassembly procedures for Artisan 837/
PX830FWD differ from those for Artisan 837/PX830FWD,
therefore, see
"9.4.2.1 Decoration Plate Left Upper Sub" (p.293) and
"9.4.2.3 Decoration Plate Left Upper" (p.296) for the procedures.
Decoration Plate Left Upper
Hook
Decoration Plate Left Upper Sub
Dowel