Epson Artisan 730 - Paper Feeding Problems

To Next Page

To Previous Page

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD

Revision G

PRODUCT DESCRIPTION Interface 27

Confidential

1.5.4 Memory Card Slots

Note* : FAT32 is not specified in the xD-Picture card standards. This printer supports only reading of xD-Picture card formatted in FAT32.

Note: • Memory Stick/PRO, SD/MMC and xD-Picture Card shares the same slot.

• When cards are inserted in the two slots at once, the slot which will be accessed first is determined according to the priority shown in the table.

• To select a card that has been inserted in a non-active slot, first remove the card in the active slot.

• In memory card direct printing mode, the image files in the active slot are valid and have assigned frame numbers. The number of images will not change if a card is inserted in another nonselected slot.

• When the card inserted in the slot is accessed from the PC, only one drive is displayed at a time as a removable disk

and only the card that is in the active slot can be accessed via the

removable disk. A card that has been inserted into a non-selected slot cannot be accessed. (This is for Windows. For Macintosh, the card in the active slot will be mounted on the desktop.)

• Does not support 5V type of memory cards.

• When a memory card is being accessed, do not touch the memory card.

• For detailed information on the supported file system and formatting the memory card, refer to " 1.7.2 Memory Card Direct Print Function (Photos Mode) ( p. 33 ) ".

C A U T I O N

If you insert a Memory Stick DUO to the Memory Card Slot

without using the adapter, make sure to turn off the printer first,

then remove the card using tweezers.

Table 1-21. List of Supported Memory Card

Priority Slot Compatible memory card Standard

Max.

capacity

Remarks

1 Memory Stick/

Memory Stick

PRO