Epson Artisan 730 - Makes Prints from Index Sheet Function

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
PRODUCT DESCRIPTION Specification for Each Function 36
Confidential
1.7.2.6 Makes Prints from Index Sheet Function
 Print settings
Note *1 : Supported only for EAI.
*2 : Printing the file name or the date can be selected from the menu on the LCD.
 Rules on reading Index Sheet markings
The user can specify images to be printed and their print settings shown in Table
1-35 by putting marking on the Index Sheet. The printer reads the markings
according to the following rules.
Note: • About 50% or more range of the mark area must be marked out to be read by the printer.
• The figure below shows the judgement example according to the rules described above.
 Index Sheet errors
Table 1-35. Print Settings
Item Print Index Sheet Makes Prints from Index Sheet
Layout ---
According to the marking on the
index sheet.
Paper Type Plain paper Premium Glossy Photo Paper
Paper Size Letter
*1
/A4
According to the marking on the
index sheet.
Date ---
Information
EAI: File name or
MMM./DD./YYYY
*2
(Sep./21./2007)
Euro/Asia: YYYY.MM.DD
(2007.09.21)
---
Quality Standard (fixed) Standard (fixed)
Fix Red-Eye Off (fixed)
According to the setting made by
the control panel.
Filter Off (fixed)
Fix Photo Off (fixed)
Scene Detection ---
Brightness Standard (fixed)
Contrast Standard (fixed)
Sharpness Standard (fixed)
Saturation Standard (fixed)
Print Info. On Photos Off (fixed) Off (fixed)
Fit Frame Off (fixed) On (fixed)
Bidirectional On (fixed) On (fixed)
Expansion ---
According to the setting made by
the control panel.
Table 1-36. Rules on Reading Markings
Item Mark Description Remarks
Left edge
(one each)
Reference position for
reading markings.
An error occurs if these markings cannot be
read due to ink stain or any other cause.
Right edge
(one each)
Reference position for
reading markings.
Block code
(36 pcs.)
Sheet information
(memory card, page)
Image selection
(30 pcs. x 3)
Selects the image to be
printed.
An error occurs if no image selection
marking is read.
Paper type/size
(4 pcs.)
Selects the paper type/size. An error occurs if two or more markings are
read for one image.
Layout (2 pcs.) Selects the layout. An error occurs if two or more markings are
read for one image. If no marking is read,
borderless layout is applied.
Print all images Prints one copy of each
image.
---
Date Prints the date information. When this marking is read, the date is
printed on the image.
Table 1-37. Index Sheet Error List
Error Type Description
Incorrect sheet setting
The Index Sheet is not properly placed on the document
glass.
Incorrect image selection marking Image selection markings are not correct.
Incorrect paper selection marking Paper selection markings are not correct.
Unmatch between memory card
and sheet
The memory card may have been changed or some
images may have been added or deleted after the Index
Sheet is printed.
<OK example> <NG example>
(not enough)
(too much)