Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
MAINTENANCE Overview 248
Confidential
Figure 6-14. Lubrication of the LD Roller shaft
Figure 6-15. Lubrication of the Intermediate Roller Shaft
Figure 6-16. Lubrication of the CDR Guide
Figure 6-17. Lubrication of the Panel Unit (Artisan 710/PX710W/TX710W)
<Lubrication Points>
Two Contact points between the
LD Roller shaft and the Base
Frame
<Type>
G-71
<Application Amount>
φ 1 x 1 circle
<Application Timing>
Before installing the LD Roller
shaft
<Remarks>
Apply with injector
<Lubrication Points>
Two contact points between the
Intermediate Roller shaft and the
Base Frame
<Type>
G-71
<Application Amount>
φ 1 x 1 circle
<Application Timing>
Before installing the Intermediate
Roller shaft
<Remarks>
Apply with injector
LD Roller shaft
Application Point
Intermediate Roller shaft
Application Point
<Lubrication Points>
On the CDR Guide
<Type>
G-74
<Application Amount>
Sufficient quantity all along
<Application Timing>
Before installing the CDR Guide
<Remarks>
Apply with injector
<Lubrication Points>
On the shaft of the Panel Unit
(3mm away from the left end)
<Type>
G-71
<Application Amount>
φ 1 x 10mm
<Application Timing>
Before installing the Panel Unit
<Remarks>
Apply with injector
CDR Guide
Application Point
Application Point
Panel Unit
3mm
To Next Page
Loading...
