Precautions for cleaning
In order not to damage the LED band surrounding the centering chamber, clean the tube using a dry rag
without rubbing it.
Never pour liquid on these parts.
9. CHANGE OR CLEAN THE EDGER TOOLS
This menu enables you to perform several operations on the tools of the edger:
• Drill bit: clean or replace with a different diameter or new bit
• Chamfering wheel: replace with a new wheel
• Grooving wheel: replace with a new wheel
Wear indicators
An indicator in the information bar makes it possible to know the level of wear of the drill bit: wear of
the drill bit at 1.0 mm or 0.8 mm
The colour of the indicator informs you of the level of wear of the tool:
• Green for a new tool
• Flashing red for a tool which needs replacing: press on the indicator for direct access to the
tool-change menu.
To Next Page
Loading...
Need help?
General
