1. Zoom on the temporal area
2. Zoom on the central zone
3. Zoom on the nasal area
c. Calling up a shape
In the job list
There are 2 ways to call a shape in the job list:
1. Calling a shape by barcode:
> Scan the barcodes using the barcode reader (optional).
2. Call a shape by selecting it in the job list:
> From the tracing screen or centering screen, select then to access the shape storage
screen.
> You can then look for a job by ID, reference, date, job type (drilled, asymmetric tracings, creative
shapes).
For more information, see Make an optical tracing > Shape Management and Storage > Legend
screen (F p.24)
To Next Page
Loading...
Need help?
General
