2. Function buttons
◦ Machine shutdown
◦ Optical tracing
◦ Centering
◦ Shape management
3. Call from an external tracer (optional)
4. Type of tracing
◦ Right-eye monocular tracing
◦ Left-eye monocular tracing
◦ Single monocular tracing of the right eye (blocking and possible edging of the right eye
only)
◦ Single monocular tracing of the left eye (blocking and possible edging of the left eye only)
5. Frame type
◦ Metal frame
◦ Plastic frame
◦ Optyl frame, for particularly flexible frames
◦ Grooved frame
◦ Drilled frame
6. Optical tracing mode
◦ Demo lens/Recut lens
◦ Pattern
7. Setting the size increase applied to the shape
To reduce any play between the demo lens and the frame, it is possible to use this menu to set the size
increase to be applied to the shape depending on the play noted.
◦ No play between the demo lens and the frame
◦ Slight play between the demo lens and the frame
◦ Significant play between the demo lens and the frame
To configure the size increase, consult the section configuring the tracer-centerer-blocker > Customizing
the tracer > Work modes and display precision (F p.129)
To Next Page
Loading...
Need help?
General
