UMG70XV3-4EN 12.01.2009 137
14 Libraries
14.5.1 Displaying a Scroll List
14.5.2 Adding a Material/Medium to the Scroll List
Select MATERIAL LIST to edit the material scroll list or
MEDIUM LIST to edit the medium scroll list.
Select ...GO BACK to return to SYSTEM SETTINGS.
Press ENTER.
Select FACTORY if all materials/media of the internal data-
base are to be displayed in the scroll list. An already exist-
ing scroll list will not be deleted but only deactivated.
Select USER to activate the user defined scroll list. Press
ENTER.
If USER is selected, the material or medium scroll list can
be edited (see section 14.5.1 to 14.5.3).
Finish editing with END OF EDIT. Press ENTER.
Select YES to store all changes of the scroll list or NO to
quit the menu item without storing. Press ENTER.
Note! If the material/medium scroll list is quit with BRK before storing, all
changes will be lost.
Select SHOW LIST. Press ENTER to display the scroll list
as in the program branch PARAMETER.
The current scroll list is displayed in the lower line.
Press ENTER to return to the scroll list MATERIAL LIST.
Select ADD MATERIAL or ADD MEDIUM to add a material/
medium to the scroll list. Press ENTER.
All materials/media not being in the current scroll list will be
displayed in the lower line.
Select the material/medium. Press ENTER. The material/
medium will be added to the scroll list.
Material list
factory >USER<
Material list
>Show list
Material list
>End of Edit
Material list
>Show list
Current list=
Grey Cast Iron
Current list=
Other Material
Current list=
Other Material
>Add Material
Stainless Steel
To Next Page
Loading...
