Flexim FLUXUS G704 - Page 210

210 UMG70XV3-4EN 12.01.2009
B Menu Structure
input of the kinematic viscosity of the medium
range: 0.01...30 000 mm
2
/s
This display is indicated only if OTHER ME-
DIUM or NATURAL GAS has been selected.
input of the operating density of the medium
range: 0.1...20 000 kg/m
3
, if SPECIAL
FUNCTION\SYSTEM SETTINGS\MEASUR-
ING\GAS-MEASURING is activated or
0.01...20 g/cm
3
, if SPECIAL FUNC-
TION\SYSTEM SETTINGS\MEASURING\
GAS-MEASURING is deactivated
This display is indicated only if OTHER ME-
DIUM or NATURAL GAS has been selected.
input of the gas compressibility factor
range: 0.001...2
This display is indicated only if OTHER ME-
DIUM or NATURAL GAS has been selected.
input of the medium temperature
default: 20 °C
input of the medium pressure
range: 1...600 bar
This display is indicated only if GAS-MEA-
SURING in SPECIAL FUNCTIONS\SYSTEM
SETTINGS\MEASURING is activated or if the
GAS-MEASURING is deactivated and FLUID
PRESSURE in SPECIAL FUNCTIONS\SYS-
TEM SETTINGS\DIALOGS/MENUS has been
activated.
selection of the transducer type
This display will be indicated only if no or spe-
cial transducers are connected.
cold start
resistant
kinem. Viscosity
1.00 mm2/s
Density
60.00 kg/m3
Gas compr.factor
1.000 factor
Medium Temperat.
20.0 C
Fluid Pressure
60.00 bar
Transducer Type 
Standard