UMG70XV3-4EN 12.01.2009 213
B Menu Structure
input of the duration over which a floating av-
erage of the measured values has to be de-
termined
range: 1...100 s
activation of the data memory
activation of the measured value output via
the serial interface to a PC or a printer
selection of the storage rate for storing mea-
sured values in the data memory
This display is indicated only if OUTPUT OP-
TIONS/STORE MEAS.DATA and/or SERIAL
OUTPUT has been activated.
input of the storage rate if EXTRA has been
selected in the previous display
range: 1...43 200 s (= 12 h)
Current Loop
activation of a current output
This display is indicated only if the current
output has been installed in SPECIAL FUNC-
TION\SYSTEM SETTINGS\PROC. OUT-
PUTS.
selection whether the sign of the measured
values is to be considered for the output
This display is indicated only if CURRENT
LOOP has been activated.
cold start
resistant
Storage Rate
once per 10 sec.
Meas.Values
>ABSOLUT< sign
To Next Page