Flexim FLUXUS G704 - SYSTEM SETTINGS\DIALOGS;MENUS

218 UMG70XV3-4EN 12.01.2009
B Menu Structure
SYSTEM SETTINGS\DIALOGS/MENUS
selection of the displays for activation/deacti-
vation or setting of menu items in the other
program branches
activation of the menu item for the input of the
pipe circumference in the program branch
PARAMETER
x
activation of the menu item for the input of the
medium pressure in the program branch PA-
RAMETER
This display is indicated only if GAS-MEA-
SURING in SYSTEM SETTINGS\MEASUR-
ING has been deactivated.
selection of the input mode for the measuring
point number in the program branch MEA-
SURING:
(1234): digits, point, hyphen
(
): ASCII editor
setting for the display for the input of the
transducer distance in the program branch
MEASURING:
• USER: only the entered transducer distance
will be displayed if the recommended and
the entered transducer distances are iden-
tical
• AUTO: only the recommended transducer
distance will be displayed
recommended adjustment: USER
activation of the menu item for the input of the
supply pressure in the program branch PA-
RAMETER for a heat flow measurement of a
liquid medium that can be liquid or vaporous
in the supply line
x
cold start
resistant
SYSTEM settings 
Dialogs/Menus
Pipe Circumfer.
off >ON<
Fluid pressure
off >ON<
Meas. Point No.:
(1234) >()<
Transd. Distance
auto >USER<
Steam in inlet
off >ON<