Flexim FLUXUS G704 - SYSTEM SETTINGS\PROC. INPUTS; SYSTEM SETTINGS\MEASURING

UMG70XV3-4EN 12.01.2009 219
B Menu Structure
activation of the menu item for the input of a
correction value (offset) for each temperature
input in the program branch MEASURING
selection of the error value delay
• DAMPING: the damping factor will be used.
• EDIT: The menu item for the input of the
error value delay in the program branch
OUTPUT OPTIONS will be activated.
x
activation of the display for the alarm state
during measurement
x
SYSTEM SETTINGS\PROC. INPUTS
selection of the displays for the setting of the
inputs of the flowmeter
linking temperature inputs and other inputs to
measuring channels
SYSTEM SETTINGS\MEASURING
selection of the displays for the settings of the
measurement
activation of the gas measurement
default: ON
activation of the concentration measurement
(option)
activation of the WaveInjector (option)
cold start
resistant
Tx Corr.Offset
off >ON<
Error-val. delay
damping >EDIT<
SHOW RELAIS STAT
off >ON<
SYSTEM settings 
Proc. inputs
Proc. inputs 
Link temperature
SYSTEM settings 
Measuring
Gas measuring
off >ON<
Enable Concentr.
no >YES<
Wave Injector
off >ON<