Flintec FT-111 - Page 57

FT-111, User Manual Rev. 2.0.0, June 2022 Page 57 of 137
[
232
AUTO T
:
NO
]
Auto taring.
Page 29
NO
YES
:
:
Disabled.
Auto tare if the gross load is bigger than MIN TARE and
stable.
[
233
AUTO CLR
:
NO
]
Auto clear.
Page 29
NO
YES
:
:
Disabled.
Auto clear, if the gross load is lower than 10d.
[
234
PWR TARE
:
NO
]
Restore Tare at power on
NO
YES
:
:
Disabled.
Tare value is saved at power off and the indication is start
in NET after switch on the instrument.
[
235
FILTER
:
HIGH
]
Adaptive digital filter.
NO
VLOW
LOW
MEDI
HIGH
VHIG
:
:
:
:
:
:
Disable. Fastest weighing; but the most sensitive to
environmental vibrations.
Very low filtering
Low filter
Medium filter
High filter
Very high filter. Slowest and the most stable weighing.
[
236
LANGUAGE
:
ENG
]
User language.
ENG
DEU
FRA
ITA
ESP
TUR
:
:
:
:
:
:
English
Deutsch
Français
Espagnol
Türkçe
[
25-
ENTRIES
]
ENTRIES
Press key or key again to enter this menu.
Or press key to go to the next sub-block.
[
251
DATE
:
DMY
]
Date format
Page 30
DMY
MDY
YMD
:
:
:
DD.MM.YYYY
MM.DD.YYYY
YYYY.MM.DD
[
252
DATE SET
:
]
Date setting
Page 30
XX.XX.XX
[
253
TIME SET
:
]
Time adjust
Page 30
HH:MM
[
254
CN
:
]
Consecutive number
Page 41
[
255
S. NAME
:
SCAL
]
Scale name.
Maximum 16 characters.
Default is SCALE-1