FOR-A HVS-3800HS User Manual

108
8-2-7. TRAIL / BORDER COLOR / MONO COLOR
Parameter Description
TRAIL
TYPE Sets trail effect types
LENGTH Sets trail length if TRAIL ON.
BORDER COLOR SAT, LUM, HUE Sets border color
MONO COLOR
ENABLE Sets monochrome color effect ON/OFF.
SAT, HUE Sets monochrome color.
 TRAIL TYPE:
Both trails fade out according to LENGTH setting made by LENGTH. DECAY and B-DECAY
trails look like after images of the effects channels,
STAR and B-STAR trails look like a
stream of particles behind the effects image. B-DECAY and B-STAR trails use a border color
for fading images.
 MONO COLOR
A monochrome color setting can be used for highlighting. Change the ENABLE item setting
to ON, and use the SAT and HUE parameters to specify the color.
8-2-8. SUB EFFECT
Following additional sub effects can be available. Note that these sub effects cannot be
always used with other modify settings.
Parameter Description
DEFOCUS
H-Lv, V-Lv, H/V-Lv Sets defocus level.
SELECT Sets defocus level ON/OFF.
MOSAIC Sets mosaic effect ON/OFF.
FREEZE Sets freeze effect.
STROBE RATE Sets strobe effect ON/OFF and illumination level.
NEGA Sets negative look effect ON/OFF.
PAINT
Y-Lv, C-Lv
Sets paint effect OFF or Y/C levels concurrently or
independently.
Y/C-Lv
DVE MODIFY(7/8)
FREEZE
OFF
STROBE
RATE
0
DEFOCUS
NEGA
OFF
SELECT
OFF
MOSAIC
0
SUB EFFECT
Y-Lv
OFF
PAINT
C-Lv
OFF
Y/C-Lv
OFF
H-Lv
OFF
V-Lv
OFF
H/V-Lv
OFF
DVE MODIFY(6/8)
TYPE
OFF
LENGTH
1
TRAIL
HUE
0_0
SHADOW/TRAIL
ENABLE
OFF
SAT
0
SAT
0
HUE
0_0
BORDER COLOR
LUM
100
MONO COLOR

FOR-A HVS-3800HS Specifications

General

Brand	FOR-A
Model	HVS-3800HS
Category	Switch
Language	English