FOR-A HVS-3800HS User Manual

31
4-5. Returning to Default
Press and hold the related F1 to F6 control to return to factory default settings.
Using the joystick to return to the factory default settings

HVS-16/24OUA

Display the menu settings that will be returned to their defaults.
 Press the MENU TOP-L, MENU TOP-R, MENU BOT-R, or MENU BOT-R button to select
the area of the three-block section.
 Select the parameter that will be returned to the defaults. To return all three parameters to
their factory defaults, press all of the X, Y, and Z buttons to light them, or simply press the
required button to light it.
 Pressing the DEF button changes the X, Y, and Z buttons that are lit to their defaults, and
then the buttons change to orange.
IMPORTANT
Holding down the DEF button when the WIPE POS or DVE ROT button is lit returns
all of the WIPE MODIFY data or DVE MODIFY data to their factory default settings.
 HVS-12ROUA

Display the menu settings that will be returned to their defaults.
 Press the MENU L or MENU R button to select the area of the three-block section.
 Select the parameter that will be returned to the defaults. To return all three parameters to
their factory defaults, press all of the X, Y, and Z buttons to light them, or simply press the
required button to light it.
 Pressing the DEF button changes the X, Y, and Z buttons that are lit to their defaults, and
then the buttons change to orange.
Press and hold
Control F1 - F6
F1 F2 F3 F4 F5 F6
F6F4 F5F3F2F1
F6F4 F5F3F2F1
MENU MENU WIPE
POS
X
DVE
ROT
YZ
FINE
MENU MENU
DEF
TOP-RTOP-L
BOT-L BOT-R
WIPE MODIFY(1/3)
MULTI
X
1
Y
0
X
0
Y
1
SOFT
0.0
ASPECT
0.0
POSITION
TYPE
OFF
LEVEL
0
EFFECT
ANGLE
0.0
INVERT
OFF
Changes can be made for the X, Y,
and Z buttons that are lit only.

FOR-A HVS-3800HS Specifications

General

Brand	FOR-A
Model	HVS-3800HS
Category	Switch
Language	English