FOR-A HVS-3800HS - Selecting the Key Source; Insert (HVS-24 OUA)

60
5-6-5. Selecting the Key Source / Insert (HVS-24OUA)
The key signal is selected using the key bus select button and AUX/KEY button. It can also
be selected from the KEY-SOURCE / INSERT menu.
This example describes when the bus button 1 (IN01 signal) is selected for KEY SOURCE
(key signal) and bus button 13 (STILL1 signal) is selected for KEY INSERT (fill signal) in
KEY1 of M/E1. When selecting from the menu, the signal name of the source is used to make
the selection.
 Selection by AUX/KEY bus

Press the KEY1-SRC button in the key bus M/E1 select section to light it.
 Press 1 in the AUX/KEY bus section. The button 1 lights up (KEY SOURCE selected).
 Next, press the KEY1-INS button in the key bus M/E1 select section to light it.
 Press 13 in the AUX/KEY bus section. The button 13 lights up (KEY INSERT selected).
 Selection by key menu

Press the KEY1 button in the M/E1 group to display the KEY1(1/6) menu. If the cursor is
in the bottom row, use the UP/DOWN button to move it.
 Set KEY-TYPE to BUS.
 Select STILL1 under the INSERT-SIGNAL option. Select IN01 under the SOURCE-
SIGNAL option.
NOTE
The KEY MATT signal cannot be selected from the AUX/KEY bus. For details about
signals that can be selected by the key, refer to section 5-6-8. “Available Signals”.
KEY1(1/6) SOURCE/INSERT
KEY
TYPE
BUS
GAIN
1.0
TYPE
BUS
KEY SIGNAL
CLIP
50
SIGNAL
STILL1
TRANSP
0.0
SIGNAL
IN01
RATE
30
INVERT
OFF
TRANSITION
LIMIT
OFF
FAM
OFF
LEVEL
100.0
INSERT SOURCE
24232221201918171615654321 1413121110978
M/E1 M/E2
AUX/KEY
12 456
AUX
789
OUT A OUT B
AUX
10 11 12
AUX
13
AUX
14
AUX
15
AUX
16
M/E1
PGM
M/E1
PREV
M/E1 M/E2 M/E2 M/E2
BUS SELECT
KEY1
SRC
KEY2
SRC
KEY1
INS
KEY2
INS
KEY3
SRC
KEY3
INS
KEY1
SRC
KEY1
INS
KEY2
SRC
KEY3
SRC
KEY2
INS
KEY3
INS
AUX AUX
AUX
3
AUX
UTL1 UTL2
AUX
MV1 MV2
AUX AUX
KEY KEY
AUX AU X AUX
CLEAN PGM PREV CLE AN
MATT
24232221201918171615654321 1413121110978
M/E1 M/E2
AUX/KEY
12 456
AUX
789
OUT A OUT B
AUX
10 11 12
AUX
13
AUX
14
AUX
15
AUX
16
M/E1
PGM
M/E1
PREV
M/E1 M/E2 M/E2 M/E2
BUS SELECT
KEY1
SRC
KEY2
SRC
KEY1
INS
KEY2
INS
KEY3
SRC
KEY3
INS
KEY1
SRC
KEY1
INS
KEY2
SRC
KEY3
SRC
KEY2
INS
KEY3
INS
AUX AUX
AUX
3
AUX
UTL1 UTL2
AUX
MV1 MV2
AUX AUX
KEY KEY
AUX AU X AUX
CLEAN PGM PREV CLE AN
MATT