FOR-A HVS-3800HS User Manual

132
11-2-6. Selecting Steps (Menu/Keypad)
The number of the currently selected step (Current Step) can be checked at the top right of
the screen.
Steps can be selected by using the following keypad buttons.
Button Description
INC One push makes one step forward.
DEC One push makes one step back.
The steps can also be selected by using the STEP STATUS - NUMBER item.
11-2-7. Adding and Overwriting Steps (Keypad)
Steps can be added in one of two ways, by pressing the INS button to insert a step or by
pressing the ADD button to add a step.
 Before adding steps
Total number of steps: 5 / Current step: 3
1 2 3 4 5
 Using STEP INSERT to add step
The current operating status is created as a new step before the current step.
1 2 3 4 5 6
The step 3 is inserted as a new step so that the total number of steps becomes step 6, and
the current step becomes step 3.
The steps 3, 4, and 5 before adding become steps
4, 5, and 6, respectively.
 Using STEP ADD to add step
The current operating status is created as a new step after the current step.
1 2 3 4 5 6
The step 4 is inserted as a new step so that the total number of steps becomes step 6, and
the current step becomes step 4.
The steps 4 and 5 before adding become steps
5 and 6.
 Overwriting steps
Press the OVERWRITE button on the keypad. The current operating status is overwritten to
the current step.

FOR-A HVS-3800HS Specifications

General

Brand	FOR-A
Model	HVS-3800HS
Category	Switch
Language	English