FOR-A HVS-3800HS - 3 System Configuration; Basic Configuration

14
3. System Configuration
3-1. Basic Configuration
IMPORTANT
To connect only a main unit and an operation unit over an arcnet connection, connect
a 75
Ω terminator to the loopthrough terminal. Also, connect 75Ω terminators when
loopthrough is not be used for the synchronous signal input and output terminals.
When loopthrough is used, connect a 75
Ω terminator to the loopthrough terminal of
the final unit.
TO MU
REF OUT
1
TRI SYNC
IN
IN 1
IN 2
IN 3
｜
IN 14
IN 15
IN 16
M/E1
PGM output
PREV output
CLEAN output
REF
GPI controller
ARCNET
RS-422
REF OUT
VDA
TSG
Character
generator
Camera
System alarm output
ALARM
Tally Unit
(HVS-TALOC20
HVS-TALOC32
HVS-TALR20
HVS-TALR32)
M/E1PGM
M/E1PREV
M/E1CLN
GPI IN GPI/TALLY OUT
GPI/tally outputs
Digital video
database
M/E2
PGM output
PREV output
CLEAN output
M/E2PGM
M/E2PREV
M/E2CLN
AUX output 1-10
AUX1-10
(75ohm terminator)
BB
IN
(75ohm terminator)