125
10-2-9. Copying and Pasting Keyframes (Keypad)
Use the INC and/or DEC button on the keypad to select the keyframe to be copied.
Press the keypad COPY button to copy the keyframe information.
Select the target keyframe for copying. Press the PASTE button to paste the keyframe
information to the target keyframe.
10-2-10. Deleting Keyframes (Keypad)
Use the INC and/or DEC button on the keypad to select the keyframe to be deleted.
Press the keypad DEL button. OVERWRITE flashes red.
Press the OVERWRITE button to delete the keyframe.
Pressing DEL before pressing OVERWRITE will cancel the operation.
10-2-11. Setting the Keyframe Duration (Menu)
The default setting for keyframe duration is 10 frames. This can be set for each keyframe
respectively.
Select a keyframe using the keypad or in the USER PATTERN menu. (To set the
duration between KF1 and KF2, select KF1.)
Change the duration using the KF DUR item in the USER PATTERN menu.
Press the keypad OVERWRITE button to overwrite the keyframe. The currently set
duration is now applied to the keyframe.
NOTE
The "Total Duration" information of the currently editing user pattern is shown at the
top right of the menu display. Total Duration is displayed for each channel.
10-2-12. Selecting the Interpolation Type (Menu)
The interpolation type can be set for each keyframe respectively in user patterns.
Select a keyframe using the keypad or in the USER PATTERN menu. ((To set the
duration between KF1 and KF2, select KF1.)
In the USER PATTERN menu, set the interpolation type to LINE, SMOOTH, or CUT
under the INTERP item.
LINE:
Linear Interpolation
SMOOTH:
Curve Interpolation
CUT:
No Interpolation
Press the keypad OVERWRITE button to overwrite the keyframe. The currently set
interpolation is now applied to the keyframe.
To Next Page
Loading...
Need help?
General
