FOR-A HVS-3800HS User Manual

130
11-2-1. Displaying the SEQUENCE Menu
Press the SEQ button above the keypad section to display the SEQUENCE menu.
 SEQUENCE menu
The following operations are available in the SEQUENCE menu. For details about the
respective parameters, refer to the relevant sections.
Paramete
r
Description Refer to
SEQUENCE
NUMBER Used to select the sequence number for editing. 11-2-2
PROTECT Used to set the selected sequence to overwrite protect. 11-2-3
DELETE Used to delete the selected sequence. 11-2-9
TOTAL DUR Used to set the total duration of the sequence. 11-2-10
FADER LINK Used to set if playback is performed by fader lever operation. 11-3-5
REST OF KF Used to display the number of steps available for sequences.
STEP
STATUS
NUMBER Used to select step. 11-2-6
DUR Used to set the duration value of the selected step. 11-2-10
FL-BRK Used to set the break for the step. 11-3-5
PLAY STATUS
LOOP Used to set if loop playback is performed.
11-3-1 DIR Used to select the playback direction.
PLAY MODE Used to select step playback ON/OFF
INTERPOLATE
BKGD
Used to set interpolation type for each transition: the BKGD,
KEY1, KEY2, and KEY3.
11-2-11
KEY1
KEY2
KEY3
CTRL ENABLE
BKGD
Used to set if the bus setting (crosspoint selection, transition
and transition type selection) saved in the sequence is used
(ON) or not (OFF) during playback for each transition.
11-3-3
KEY1
KEY2
KEY3
BLACK
XPT ENABLE
BKGD
Used to set if the crosspoint selection saved in the sequence
is used (ON) or not (OFF) during playback for each
transition.
11-3-2
KEY1
KEY2
KEY3
EFF BKGD
BLACK
ENABLE
BKGD
Used to select whether the BLACK TRANS is performed or
not during sequence playback, if it is saved in the sequence.
TRANS
ENABLE
BKGD
Used to select whether each transition is performed or not
during sequence playback, if it is saved in the sequence.
11-3-4
KEY1
KEY2
KEY3
SEQENCE(4/4) SEQ NO 10--STEP 10/ 20
M1_BKGD_CH1
M1_BKGD_CH2
M1_KEYER_CH1
M1_KEYER_CH2
M2_BKGD_CH1
SELECT
1
IN01
IN02
IN05
IN10
IN11
IN01
ENABLE
INPUT
INPUT
INPUT
INPUT
INPUT
ENABLE
ENABLE
DISBLE
ENABLE
DISBLE
SEQUENCE information
(Sequence No.) – (Step No.) / (Total steps for the sequence)
SEQUENCE (1/4)
SEQ NO10--STEP 10/ 20
NUMBER
10
NUMBER
10
SEQUENCE
PROTCT
OFF
STEP STATUS
DUR
30
DELETE
OFF
FL-BRK
OFF
TOTAL
DUR
300
FADER
LINK
OFF
REST
OF KF
(180)
PLAY
MODE
ALL
LOOP
ON
DIR
NORMAL
PLAY STATUS
SEQENCE(3/4) SEQ NO 10--STEP 10/ 20
M/E2
INTERPOLATE
CTRL ENABLE
XPT ENABLE
TRANS ENABLE
SELECT
2
LINE
ON
ON
ON
BKGD
ON
KEY1
ON
LINE
ON
ON
ON
KEY2
ON
KEY3
ON
LINE
ON
ON
ON
LINE
ON
ON
ON
SEQENCE(2/4) SEQ NO 10--STEP 10/ 20
M/E1
INTERPOLATE
CTRL ENABLE
XPT ENABLE
TRANS ENABLE
SELECT
2
LINE
ON
ON
ON
BKGD
ON
KEY1
ON
LINE
ON
ON
ON
KEY2
ON
KEY3
ON
LINE
ON
ON
ON
LINE
ON
ON
ON

FOR-A HVS-3800HS Specifications

General

Brand	FOR-A
Model	HVS-3800HS
Category	Switch
Language	English