FOR-A HVS-3800HS - DVE MODIFY Menu

12
1-11. DVE MODIFY Menu
To open DVE MODIFY menu for a pattern, press a DVE pattern button in the transition section before pressing DVE
modify menu buttons. To open DVE MODIFY menu for a bus, press any one of DVE PGM, DVE PST, DVE KEY1,
DVE KEY2, DVE KEY3 before pressing DVE modify menu buttons.
DVE MODIFY-TOP menu (HVS-12ROUA)
Sub-menu Description Refer to
1. POS/SIZE
(If applied to a pattern: ) Changes initial/final position and size of a pattern.
8-2-1
(If applied to a bus: ) Changes position and size of a DVE image.
2. ROTATION
(If applied to a pattern: ) Changes local/global position/rotation of pattern.
(If applied to a bus: ) Changes local/global position/rotation of pattern.
3. CROP
(If applied to a pattern: ) Crops out the initial or final image of a pattern.
8-2-4
(If applied to a bus: ) Crops out the part of a DVE image.
4. WARP
(option)
(If applied to a pattern: ) Adds warp modification to a pattern.
8-2-5
(If applied to a bus: ) Adds warp modification to a DVE image.
5. BORDER
(If applied to a pattern: ) Adds a border to the image of a pattern.
8-2-6
(If applied to a bus: ) Adds a border to a DVE image.
6.
TRAIL/MONO
(If applied to a pattern: ) Adds a trail or sets monochrome for a hilite.
8-2-7
(If applied to a bus: ) Adds a trail or sets monochrome for a hilite
7. SUB
EFFECT
(If applied to a pattern: )
Adds sub effects such as paint, defocus, mosaic, nega,
freeze and strobe to a pattern.
8-2-8
(If applied to a bus: )
Adds sub effects such as paint, defocus, mosaic, nega,
freeze and strobe to a DVE image.
8. HILITE
(If applied to a pattern: ) Adds hilite and shadow effects to the image of a pattern.
8-2-9
(If applied to a bus: ) Adds hilite and shadow effects to a DVE image.
SELECT
Used to select a sub menu (Pressing F1 or DOWN button
will open the selected sub menu.)
Use the UP/DOWN buttons to move between the DVE MODIFY (1/8) to (8/8) menus.
DVE MODIFY (1/8) menu POS button
Submenu Parameter Default Setting Range Refer to
(If applied to a pattern:) Pattern image will be shown at the right above of the menu.
(If applied to a bus:) "LINE-DVE" will be shown at the right above of the menu.
UPAT STORE OFF ON, OFF 10-2
DVE STILL
IMAGE OFF ON, OFF
8-2-1
STORE Saves DVE STILL images.
POSITION
X 0
-7999 to 7999
Y 0 -7999 to 7999
SIZE
X-Y 0 0 to 7999
X 0 0 to 7999
Y 0 0 to 7999
DVE MODIFY (2/8) menu ROT button
Submenu Parameter Default Setting Range Refer to
LOCAL
POSITION
X, Y, Z 0 -7999 to 7999
8-2-1
LOCAL
ROTATION
X, Y, Z 0_0 -7_999 to 7_999 (*1)
GLOBAL
POSITION
X, Y, Z 0 -7999 to 7999
GLOBAL
ROTATION
X, Y, Z 0_0 -7_999 to 7_999 (*1)
(*1) When ROT STEP is set to 1000 in the SETUP-DVE SETUP menu.