Fortinet Technologies Inc. Page 135 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Department Select the department that the extension belongs to. Click
Edit to modify the current department or click New to
configure a new one. For more information on extension
department, see “” on page 166.
Phone type Select a supported phone type for the extension.
If you cannot find your phone type in the list, select Generic.
This phone will not receive the PBX setup information from the
FortiVoice unit.
When you edit an extension assigned to a phone that does
not match what you entered in this field, an orange
exclamation mark icon appears. Clicking this icon enters the
actual phone type into this field.
MAC address Enter the MAC address of the SIP phone using the extension
number. This option does not apply to
FortiFone-850i/860i/870i.
When you edit an extension assigned to a FortiFone that does
not match what you entered in the Phone type field, an orange
exclamation mark icon appears. Clicking this icon enters the
FortiFone into the Phone type field. An orange exclamation
mark icon also appears beside the MAC address field.
Clicking this icon enters the FortiFone MAC address into the
MAC address field.
Handset ID If your Phone type is FortiFone-850i/860i/870i, you can enter
the handset ID range (1-8) because these models support
multiple handset and each handset is assigned an extension
number.
Base MAC address If your Phone type is FortiFone-850i/860i/870i, enter the MAC
address of the base supporting the handsets.
When you edit an extension assigned to a FortiFone that does
not match what you entered in the Phone type field, an orange
exclamation mark icon appears. Clicking this icon enters the
FortiFone into the Phone type field. An orange exclamation
mark icon also appears beside the Base MAC address field.
Clicking this icon enters the base MAC address into the field.
To Next Page
Loading...
