Fortinet FortiVoice - Page 168

Fortinet Technologies Inc. Page 168 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
To create a VoIP trunk
1. Go to Trunks > VoIP > SIP.
2. Click New.
3. Configure the following:
Figure 56: New VoIP trunk
Port The port for SIP sessions.
SIP Setting The SIP profile applied to this trunk.
Status The status of the SIP trunk.
• Not registered: The trunk is not registered with the VoIP service
provider and is not in service.
• In service: The trunk is registered with the VoIP service provider and
is in service.
• Unavailable: The trunk is not reachable.
• Alarm detected: There is a problem with the phone line.
• Admin down: The trunk is disabled.
• Unmonitored: The trunk is unknown.
GUI field Description
SIP