Fortinet Technologies Inc. Page 169 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Name Enter the name of the VoIP service provider.
Display name Enter your caller ID that will appear on the called phone, such
as Example Company.
Main number Enter the phone number that will appear on the called phone.
If you entered the external caller ID in “External caller ID” on
page 133 or “External caller ID” on page 151, this trunk phone
number will be overridden by the external caller ID.
Enabled Select to activate the SIP trunk.
SIP Setting
SIP server Enter the VoIP provider’s IP address or domain name. For
example, 172.20.120.11 or voip.example.com.
SIP port Most SIP configurations use TCP or UDP port 5060 for SIP
sessions. If your VoIP service provider uses a different port for
SIP sessions, enter the port number.
If you select the Using DNS record option, this field is greyed
out.
Using SRV record If you entered the VoIP provider’s domain name in the SIP
server field, select this option to translate the domain name
and obtain the SIP port.
You can only select this option if your VoIP provider uses the
same setting.
User name Enter the user name provided by the VoIP service provider for
the FortiVoice unit to register with the SIP server.
Password Enter the password provided by the VoIP service provider for
the FortiVoice unit to register with the SIP server.
Auth. user name Some VoIP providers may provide you with an authentication
user name that is different from your user name for the
FortiVoice unit to register with the SIP server. If tat is the case,
enter the authentication user name here.
Realm/domain Some VoIP service providers’ SIP servers authenticate the
PBXes that register with them by requesting the name of the
host performing the authentication. If this is the case with your
VoIP service provider, enter the name of the host performing
the authentication provided by your VoIP service provider.
SIP setting Select the SIP profile to apply the supported phone features
and codecs for the trunk. To match the information of the VoIP
service provider, you can edit the existing profile or click New
to add a new one. For more information, see “Configuring SIP
profiles” on page 115.
To Next Page
Loading...
