Fortinet FortiVoice - Page 183

Fortinet Technologies Inc. Page 183 FortiVoice Enterprise Phone System 4.0.0 Administration Guide
Figure 64: Office peer trunks
To set up an office peer
1. Go to Trunks > Office Peers> Office Peers.
2. Click New.
3. Configure the following:
GUI field Description
Fetch Office
Directory
Select a trunk and click this button to obtain the phone directory from
this office peer.
This option only works if the PBX of the remote office is a FortiVoice unit
and Fetch directory (see “Fetch Directory” on page 184) is selected on
the remote unit.
You can view the directory by going to Status > Directory and selecting
this office in the Office field. For more information, see “Viewing phone
directories” on page 37.
Enabled Select to activate this trunk.
Name The name of the office peer.
Display name The caller ID that will appear on the called phone, such as Example
Company.
Type The type of the trunk.
Server The domain name or IP address of the remote office’s PBX. For
example, 172.20.120.11 or peer.example.com.
Port The port number for VoIP network on the remote office’s PBX.
SIP Setting The SIP profile applied to this trunk.
Status The status of the SIP trunk.
• Not registered: The trunk is not registered with the VoIP service
provider and is not in service.
• In service: The trunk is registered with the VoIP service provider and
is in service.
• Unavailable: The trunk is not reachable.
• Alarm detected: There is a problem with the phone line.
• Admin down: The trunk is disabled.
• Unmonitored: The trunk is unknown.