E-mail Settings
361
Setups
10
Primary Server
Set the primary server of the directory server.
1 Select [Primary Server].
2 Select the item to be set, and
select [Change Settings].
3 Set the setting value.
îš„Primary Server Setup
You can select the primary server specification method from [By IP Address] and [By
Server Name].
îš„Primary Server IP Address
Set the primary server IP address, using values from 0 to 255.
Note • You can set this when [Primary Server Setup] is [By IP Address].
• 224.XXX.XXX.XXX to 255.XXX.XXX.XXX and 127.XXX.XXX.XXX cannot be set.
îš„Primary Server Name
You can set the server name for the primary server. You can enter up to 64 characters.
Note • You can set this when [Primary Server Setup] is [By Server Name].
Primary Server Port Number
Set the primary server port number in the range from 1 to 65535.
Secondary Server
Set the secondary server that is used when the primary server is not available.
1 Select [Secondary Server].
2 Select the item to be set, and
select [Change Settings].
3 Set the setting value.
îš„Secondary Server Setup
You can select the secondary server specification method from [By IP Address] and [By
Server Name].
To Next Page
Loading...
Need help?
General
