15 Problem Solving
484
Problem Solving
15
The entire page
is printed faint.
When the print was made
using tray 5 (bypass tray),
the size and type of the
actually loaded paper
differed from the setting on
the print driver.
Either load paper of the correct size and
type into tray 5 (bypass tray), or fan the
paper thoroughly before loading it again.
Refer to "Loading Paper in Tray 5 (Bypass)"
(P.273).
Two or more sheets may be
feeding at once.
Fan the paper well and reset.
Refer to "Loading Paper" (P.271).
Paper becomes
wrinkled.
Text is blurred.
The paper in use is
unsuitable.
Replace with paper from a new ream.
Refer to "Loading Paper" (P.271).
Paper is being added while
it is being fed.
Is the paper damp?
Outline
characters on a
colored
background
longwise.
The drum cartridge is
depleted or damaged.
Contact our Customer Support Center.
Text or images
are printed at an
angle.
The paper guide in the
paper tray is not set at the
correct position.
Set the horizontal and vertical paper
guides to the correct positions.
Refer to "Loading Paper in Trays 1 to 2"
(P.271).
Symptoms Check Remedy
To Next Page
Loading...
Need help?
General
