16 Specifications
556
Specifications
16
îš„Booklet Finisher D2 Specifications
Size/Weight Width 1,050 × Depth 725 × Height 1,165 mm, 105 
kg
Note • This weight includes staple cartridge.
Dimensions Width 2,299 × Depth 781 (when the bypass tray is
extended completely)
Tray type Output Tray : Collated/Uncollated
Finisher Tray : Collated/Uncollated (Offset
available)
Booklet Tray : Collated/Uncollated
Paper size/ Output tray Max : A3, 12.6 × 19.2" (330 × 488 mm)
Min : A6 (postcards)
Finisher tray Max : A3, 12.6 × 19.2" (330 × 488 mm)
Min : B5
Booklet Tray Max : A3, 13 × 18"
Min : A4, 8.5 x 11"
Supported paper Output tray 52 - 253 g/m
2
Finisher tray 52 - 216 g/m
2
Booklet Tray Center binding: 60 - 90 g/m
2
Center folding: 60 - 105 g/m
2
Important • A paper for cover is available 220 g/m
2
or
less.
• Paper for contents is available 60 -80 g/m
2
,
when a paper 91 - 220 g/m
2
is used for a
cover attached.
Tray capacity
Important • FX P paper
Output tray 500 sheets
Finisher tray 2,000 sheets, 200 sets
*
* When using A4 , B5 , 8.5 × 11" , 8 × 10" ,
7.25 x 10.5" , or 16K .. For other paper sizes,
masimum capacity is 1,500 sheets, 100 sets.
Booklet tray 20 sets
Important • Maximum paper apacity varies depending on
the type of paper that is being used.
Staple Maximum
stapled
sheets
100 sheets
Important • When using paper larger than A4 or 8.5 x
11", maximum stapled sheets is 65 sheet,
• Depending on the type of paper that is being
stapled, the stapled nails may be bent..
Size suitable
for stapling
Maximum: A3, 11 × 17",
Minimum: B5
Stapling
position
<1 place>
Front: angle
Center: parallel
Inner: parallel (angle for A3 and A4)
<2 places>
parallel
To Next Page
Loading...
Need help?
General
