Fuji Xerox DocuCentre S2220 User Manual

9 Tools
166
Tools
9
Border Limit Used to set the image size limit to split the
page when the incoming data is too large for
the output paper.
P.192
Receive Size Used to restrict the paper size of faxes that
can be received.
P.193
Print Size (Received Letter) Used to set whether to print the incoming
Letter size data on Letter paper or A4 paper.
P.193
Immediate Fax Switch Used to set the remaining memory level to
move to immediate communications during
fax transmission.
P.193
Off Hook Level Used to set the detection level of an off-the-
hook receiver when using an external phone.
P.194
Region Used to set the region name. P.194
Activity Report Used to set whether to automatically print
out the results of sent and received
documents that are stored in memory.
P.194
Transmission Report Used to set the method used to print fax
transmission results.
P.195
Broadcast Report Used to set the method of printing
transmission results when "broadcasting"
(sending the same fax to multiple recipients
at once).
P.195
Protocol Report Used to set the method used to print
protocols.
P.196
System Settings Used to set other functions. P.197
Power Saver Timer Used to set the amount of time the machine
waits before entering its power-saving modes.
P.197
Auto Reset Used to set the amount of time the machine
waits before resetting the screen while an
operation is being performed.
P.197
Auto Print Used to set the amount of time the machine
waits before starting to print and after
receiving a print job.
P.197
Idle Timeout Used to set the amount of time the machine
waits before documents are added.
P.197
Job Cancel Used to set whether to automatically cancel
the job when a job error occurs.
P.198
Clock Used to set the time on the machine's system
clock.
P.198
Audio Tones Used to set the volume of the machine's
audio tones.
P.200
Job History Verbose Used to set whether to have the machine
automatically print Job History Reports or not.
P.201
Auto Paper Selection Used to set the paper tray for the paper size
detected automatically.
P.201
User Control Used to restrict the use of the Copy functions. P.201
Paper Size Settings Used to set the group of standard document/
paper sizes to be detected.
P.202
Setting Item Description See Page:

Fuji Xerox DocuCentre S2220 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2220
Category	All in One Printer
Language	English