EasyManuals Logo
Home>Fuji Xerox>All in One Printer>DocuCentre S2220

Fuji Xerox DocuCentre S2220 User Manual

Fuji Xerox DocuCentre S2220
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #266 background imageLoading...
Page #266 background image
13 Problem Solving
266
Problem Solving
13
005-122
005-123
005-125
005-131
005-132
005-134
005-135
005-136
005-139
005-145
005-147
005-196
005-197
005-198
005-199
[Cause] A document jam occurred in the document feeder.
[Remedy] Remove the jammed document.
Refer to "Document Jams" (P.284).
005-210
005-275
005-280
[Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
005-305 [Cause] The document feeder's left cover is open.
[Remedy] Close the document feeder's left cover.
005-500 [Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
005-907
005-908
005-913
[Cause] A document jam occurred in the document feeder.
[Remedy] Remove the jammed document.
Refer to "Document Jams" (P.284).
005-940 [Cause] An error occurred in the document feeder.
[Remedy] Press the control panel's <Stop> button, and set the document on
the document feeder again.
005-948 [Cause] A document size mismatch error occurred in the document feeder.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
007-270 [Cause] Tray 1 malfunction.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 1.
007-272 [Cause] Tray 3 malfunction.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 3.
007-273 [Cause] Tray 4 malfunction.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center. You can use
a tray other than Tray 4.
Error Code Cause and Remedy

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuCentre S2220 and is the answer not in the manual?

Fuji Xerox DocuCentre S2220 Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuCentre S2220
CategoryAll in One Printer
LanguageEnglish

Related product manuals