Fuji Xerox DocuCentre S2220 User Manual

Error Code
267
Problem Solving
13
010-311
010-312
010-320
010-327
010-379
010-392
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
010-602 [Cause] Temperature sensor of the machine detected abnormality.
[Remedy] The machine will automatically recover when the machine cools
down. Wait for a while, and try again.
016-346
016-372
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power. If the same message is
displayed again, contact our Customer Support Center.
016-500
016-501
016-502
016-504
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
016-570 [Cause] A communication error occurred while printing.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-571 [Cause] A communication error occurred during print processing.
[Remedy] The machine will automatically recover. Wait a moment, and try
again.
016-598 [Cause] The size of an e-mail page exceeds the maximum message size
because of page splitting.
[Remedy] Press the control panel's <Start> button to redo the operation, or
press the <Stop> button to cancel the operation.
016-742
016-744
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the display is blank,
and then switch on the machine power.
016-749 [Cause] An error occurred.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-759 [Cause] A setting has been entered for the maximum number of permitted
copies, and has been reached. Alternatively, a user who has reached
their maximum number of copies logged in.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-764 [Cause] An error occurred on the network.
[Remedy] Press the control panel's <Stop> button and cancel the job.
016-765
016-766
[Cause] The SMTP server's memory area for incoming e-mail is full.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-767 [Cause] Unable to send the e-mail because the address is not correct.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-768 [Cause] E-mail data creation failed.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
016-776 [Cause] A job is canceled.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
Error Code Cause and Remedy

Fuji Xerox DocuCentre S2220 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2220
Category	All in One Printer
Language	English