Fuji Xerox DocuCentre S2220 User Manual

13 Problem Solving
270
Problem Solving
13
027-518 [Cause] Failed to login the forwarding destination.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-520 [Cause] Invalid characters are used or the specified path is not found.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-522 [Cause] Unable to write in the forwarding destination.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-528 [Cause] Data could not be written to the shared folder because the
computer's hard disk is full.
[Remedy] Press the control panel's <Stop> button, and delete any unneeded
data to create room on the hard disk.
027-543 [Cause] The SMB server (NetBIOS) name is invalid.
[Remedy] Check whether the server name of the SMB server is correct, or press
the control panel's <Stop> button to cancel the job.
027-779 [Cause] Failed to authenticate the SMTP server.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
033-313
033-316
[Cause] An error occurred while sending a fax.
[Remedy] Press the control panel's <Stop> button, and check the settings.
033-325 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is
blank, and then switch on the machine power. If the same message
is displayed again, contact our Customer Support Center.
033-326 [Cause] The sender for the Scan to E-mail function has not been entered.
[Remedy] Press the control panel's <Stop> button, and check the settings.
033-503
033-504
033-505
033-506
033-507
033-509
033-510
033-517
033-526
033-529
033-531
033-532
[Cause] An error occurred during fax transmission.
[Remedy] The machine will automatically recover. Wait for a while, and try
again.
033-541 [Cause] The recipient of the specified number is not registered.
[Remedy] Specify the recipient correctly, or press the control panel's <Stop>
button, and cancel the job.
033-547 [Cause] Communication was terminated by a cause such as pressing the
<Stop> button.
[Remedy] The machine will automatically recover. Press the control panel's
<Stop> button, and try again.
033-548 [Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Press the control panel's <Stop> button, and cancel the job.
Error Code Cause and Remedy

Fuji Xerox DocuCentre S2220 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre S2220
Category	All in One Printer
Language	English