5.2 Common Menus Setting 149
[Parallel]
Note
• This menu appears only when the Parallel Port Kit (optional) is installed.
Network/Port
Parallel
Parallel
Port Status
Parallel
Print Mode
Parallel
PJL
Parallel
Adobe Protocol
Parallel
Auto Eject Time
Parallel
Bi-directional
Setting Description
Port Status Sets whether to enable or disable the parallel port at printer start-up.
•[Enabled]
• [Disabled] (default)
Important
• When there is not enough memory, either disable unused ports, or change the
memory allocation under [Allocate Memory].
Print Mode Sets the method of processing data (language emulation).
•[Auto] (default)
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly.
(See *1 on P. 215.)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
After receiving data from a computer, the printer processes the data with the
selected print language.
•[HexDump]
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). (See *3 on P. 215.)
PJL Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 215.)
•[Enabled] (default)
•[Disabled]
To Next Page
Loading...
Need help?
General
