152 5 Control Panel Settings
[IPP]
Network/Port
IPP
IPP
Port Status
IPP
Print Mode
IPP
PJL
IPP
Access Control
IPP
DNS
IPP
Added Port Number
IPP
Connect Time-Out
IPP
TBCP Filter
Setting Description
Port Status Sets whether to enable or disable the IPP port at printer start-up.
•[Enabled]
• [Disabled] (default)
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Print Mode Sets the method of processing data (language emulation).
•[Auto] (default)
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly. (See *1 on P. 215.)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
After receiving data from a computer, the printer processes the data with the
selected print language.
•[HexDump]
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). (See *3 on P. 215.)
PJL Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 215.)
•[Enabled] (default)
•[Disabled]
Access Control Sets whether to enable or disable access control when stopping or deleting a print
job, pausing the printer, or when canceling a pause.
• [Disabled] (default)
•[Enabled]
To Next Page
Loading...
Need help?
General
