EasyManuals Logo

Fuji Xerox DocuPrint 5105 d User Manual

Fuji Xerox DocuPrint 5105 d
419 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
156 5 Control Panel Settings
[UPnP]
Print Mode Sets the method of processing data (language emulation).
•[Auto] (default)
After receiving data from a computer, the printer automatically detects its
language emulation and processes the data accordingly. (See *1 on P. 215.)
• [PS] [ESCP] [HP-GL/2] [PCL] [TIFF] [KS] [KSSM] [KS5895]
After receiving data from a computer, the printer processes the data with the
selected print language.
•[HexDump]
Allows you to view data received from a computer by printing it in ASCII code
(hexadecimal format). (See *3 on P. 215.)
PJL Sets whether to enable or disable PJL commands that are sent from the computer.
PJL commands control print jobs, and are required to print jobs using the print
driver. Use of PJL commands allows you to specify the language emulation for the
next job while another language emulation is being processed by the printer. (See
*5 on P. 215.)
•[Enabled] (default)
•[Disabled]
Connect Time-Out Sets the time after which data reception is canceled if data is not received. Specify
the value from 2 to 65535 seconds in 1-second increments. (See *2 on P. 215.)
• [60 Seconds] (default)
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [9100] (default)
Note
• Set only unique port numbers.
TBCP Filter Sets whether to enable or disable the TBCP filter during processing of PostScript
data.
• [Disabled] (default)
•[Enabled]
Network/Port
UPnP
UPnP
Port Status
UPnP
Port Number
Setting Description
Port Status Sets whether to enable or disable the UPnP port at printer start-up.
•[Enabled]
• [Disabled] (default)
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
UPnP/WSD (See *6 on P. 215) ports and Internet services that use HTTP protocol
can share the same port number.
Setting Description

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint 5105 d and is the answer not in the manual?

Fuji Xerox DocuPrint 5105 d Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint 5105 d
CategoryAll in One Printer
LanguageEnglish

Related product manuals