5.2 Common Menus Setting 157
[WSD]
Note
• WSD stands for Web Services on Devices.
[SOAP]
Network/Port
WSD
WSD
Port Status
WSD
Port Number
Setting Description
Port Status Sets whether to enable or disable the WSD port at printer start-up.
•[Enabled] (default)
•[Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
UPnP/WSD ports and Internet services that use HTTP protocol can share the
same port number.
Network/Port
SOAP
SOAP
Port Status
SOAP
Port Number
Setting Description
Port Status Sets whether to enable or disable the SOAP port at printer start-up.
•[Enabled] (default)
•[Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [80] (default)
Note
• Set only unique port numbers. Note, however, that InternetServices/IPP/SOAP/
UPnP/WSD (See *6 on P. 215) ports and Internet services that use HTTP protocol
can share the same port number.
To Next Page
Loading...
