158 5 Control Panel Settings
[ThinPrint]
Note
• This item appears only when HDD Extension Kit (optional) is installed.
•To use ThinPrint
®
feature, contact our Customers Support Center or your dealer for details.
[SNMP]
Note
• SNMP must be configured when using an application to remotely manage multiple printers. SNMP manages
printer information and provides it to the management application.
Network/Port
ThinPrint
ThinPrint
Port Status
ThinPrint
Port Number
ThinPrint
SSL/TLS
Setting Description
Port Status Sets whether to enable or disable the ThinPort port at printer start-up.
•[Enabled]
• [Disabled] (default)
Port Number Sets the port number from 1 to 65535. (See *2 on P. 215.)
• [4000] (default)
Note
• Set only unique port numbers.
SSL/TLS Sets whether to enable or disable SSL encrypted communications.
• [Disabled] (default)
•[Enabled]
Note
• Client certificate is necessary for SSL communications.
Configure an appropriate certificate on the printer.
Network/Port
SNMP
SNMP
Port Status
SNMP
TransportProtocol
Setting Description
Port Status Sets whether to enable or disable the SNMP port at printer start-up.
•[Enabled] (default)
•[Disabled]
Important
• If the printer runs out of memory when the port is enabled, the port is sometimes
automatically disabled. If this happens, either disable unused ports, or change
the memory allocation under [Allocate Memory].
To Next Page
Loading...
