162 5 Control Panel Settings
[Ethernet]
Note
• When the Secondary Ethernet Kit (optional) is installed, [Ethernet Settings 1] and [Ethernet Settings 2] are
displayed.
HTTPS Port Number
HTTP Port Number
Sets the port number used in HTTPS and HTTP from 1 to 65535.
(See *2 on P. 215.)
• [8080] (default)
Note
• Set only unique port numbers.
HTTPS
Authenticate
HTTP
Authenticate
Sets whether to enable or disable authentication feature of EP proxy server used in
HTTPS and HTTP.
• [Disabled] (default)
•[Enabled]
HTTPS Login Name
HTTP Login Name
Enter the login name of EP proxy server used in HTTPS and HTTP.
Up to 31 characters are allowed. (See *4 on P. 215.)
HTTPS Password
HTTP Password
Enter the password of EP proxy server used in HTTPS and HTTP.
Up to 31 characters are allowed. (See *4 on P. 215.)
Proxy File URL Enter the URL for the proxy settings file.
Up to 255 characters are allowed.(See *4 on P. 215.)
Network/Port
Ethernet
Ethernet
Ethernet Settings
Setting Description
Ethernet Settings Sets the communication speed and connector type for the Ethernet interface.
•[Auto]
Automatically detects 100 Mbps (full duplex), 100 Mbps (half duplex), 10 Mbps
(full duplex), 10 Mbps (half duplex), or 1000 Mbps.
• [Auto(UpTo100Mbps)] (default)
Automatically detects 100 Mbps (full duplex), 100 Mbps (half duplex), 10 Mbps
(full duplex), or 10 Mbps (half duplex).
• [100 Mbps Full-Dup]
Uses 100 Mbps (full duplex).
• [100 Mbps Half-Dup]
Uses 100 Mbps (half duplex).
• [10 Mbps Full-Dup]
Uses 10 Mbps (full duplex).
• [10 Mbps Half-Dup]
Uses 10 Mbps (half duplex).
• [1000 Mbps]
Sets 1000 Mbps.
Note
• When the Secondary Ethernet Kit (optional) is installed, [Auto(UpTo100Mbps)] is
displayed only for the primary interface. The default value for the secondary
interface is [Auto].
• When the Secondary Ethernet Kit (optional) is installed, the secondary interface
is required to support gigabit to enable [Ethernet Settings 2] > [1000 Mbps].
Setting Description
To Next Page
Loading...
Need help?
General
