5.2 Common Menus Setting 185
[Image Log Control]
Important
• Consult your dealer to use the Image Log Control feature.
Note
• This item appears only when the HDD Extension Kit (optional) is installed.
System Settings
Image Log Control
Image Log Control
Image Log Control
Image Log Control
Generate ImageLog
Image Log Control
Assurance Level
Image Log Control
Transfer ImageLog
ImageLog Transfer
Log Transfer
ImageLog Transfer
Logs To Transfer
ImageLog Transfer
Transfer Timing
ImageLog Transfer
Assurance Level
Setting Description
Image Log Control Set whether or not to use the image log control feature. Normally, the
printer is used with this feature set to [Off]. Consult your dealer to use the
Image Log Control feature.
•[Off] (default)
•[On]
Generate ImageLog Sets whether or not to generate an image log.
•[Off]
•[On] (default)
Assurance Level Sets the level at which an image log is reliably generated for a print job.
• [High]
Image logs are generated unconditionally. For this reason, print
operations are sometimes affected.
•[Low] (default)
Image logs are generated as much as possible with priority given to
printer performance. For this reason, generation of image logs is
sometimes skipped.
To Next Page
Loading...
