210 5 Control Panel Settings
[PDF]
Allows you to send PDF files directly to the printer.
Note
• The [Quantity], [2 Sided Printing], [Print Mode], [Password], [Collated], [Output size], and [Layout] settings are
enabled when printing PDF files without using ContentsBridge Utility (software by Fuji Xerox Co., Ltd.). For more
information, refer to "3.10 Direct Printing of PDF Files" (P. 98).
LanguageEmulation
PDF
PDF
Process Mode
PDF
Quantity
PDF
2 Sided Printing
PDF
Print Mode
PDF
Password
PDF
Collated
PDF
Output Size
PDF
Layout
Setting Description
Process Mode Sets the print processing mode for PDF files.
•[PDF Bridge] (default)
PDF files are processed using the PDF Bridge feature installed on the printer.
•[PS]
PDF files are processed using the PostScript feature.
Note
• Printing results when [PS] is selected differ from when [PDF Bridge] is selected.
Quantity Sets the print quantity.
• [1 Set(s)] to [999 Set(s)] (default: [1 Set(s)])
Note
• Depending on the protocol used for file transmission, the value specified on the
protocol may override the [Quantity] setting.
2 Sided Printing Sets whether to enable 2-sided printing.
• [Off] (default)
Disables 2-sided printing.
• [Long Edge Flip]
Prints on both sides of the paper so that the finished document opens like a book.
• [Short Edge Flip]
Prints on both sides of the paper so that the finished document opens like a
calendar.
To Next Page
Loading...
Need help?
General
