5.2 Common Menus Setting 211
[PCL]
For information about the items under [PCL], refer to the
‘
PCL Emulation Setting Guide
’
on the
Media (Software/Product Manual) included with the printer.
Print Mode Sets the print mode to one of the following:
•[High Speed]
Prints documents at a higher speed than [Normal].
• [Normal] (default)
Prints documents at standard speed with standard image quality.
•[High Quality]
Produces higher image quality than [Normal], but at a lower print speed.
Password Before printing a password-locked PDF, set the password here. The file will be
printed only if its password matches the password you set here.
The password can be up to 32 alphanumeric characters long.
(See *4 on P. 215.)
Collated Sets whether to collate multiple-set documents. (1, 2, 3...1, 2, 3...)
• [Off] (default)
•[On]
Output Size Sets the output paper size.
•[Auto] (default)
Automatically determines the output size based on the size and settings of your
PDF file.
• [A4] or [8.5 x 11
"
]
Displays either [A4] or [8.5 x 11
"
] depending on the option selected under [Admin
Menu] > [Printer Settings] > [DefaultPaperSize].
Layout Sets the output layout.
•[Auto %] (default)
Automatically selects the output size and calculates the zoom ratio to print the
file as large as possible on the output paper.
• [100% (No Zoom)]
Prints your PDF file in its original size regardless of the output size.
• [Booklet]
Creates a booklet from a set of 2-sided documents. It correctly positions each
page to produce output, that when folded, will be ordered read like a book.
Depending on the page structure, [Booklet] cannot be used and [Auto %] is used
instead. When [Output Size] is [A4], the output size will be A4. When [Output
Size] is [Auto], the output size will be A3 or A4.
•[2 Pages Up]
Prints two pages onto one sheet of paper. When this is selected, the output size
will be A4 or 8.5 x 11” depending on the option selected under [Admin Menu] >
[Printer Settings] > [DefaultPaperSize].
•[4 Pages Up]
Prints four pages onto one sheet of paper. When this is selected, the output size
will be A4 or 8.5 x 11” depending on the option selected under [Admin Menu] >
[Printer Settings] > [DefaultPaperSize].
Setting Description