264 6 Troubleshooting
016-505 Unable to log into the POP3 server when sending e-mail.
Check on CentreWare Internet Services whether the user name and password used on the POP3 server
are correct.
016-506 Unable to write the image log because the image log storage space is insufficient on the machine.
Execute the job again. If the error still is not resolved, take one of the following measures:
• Delete unnecessary image logs
• Change the [Assurance Level] for image logs to [Low]
In this case, the contents of the logs are not secured.
016-507 When using the Image Log Control feature, failed to forward the image log to the server.
Either set the forwarding rule for image logs from the server to the machine, or set [Transfer Image Log]
to [Disabled].
016-508 When using the Image Log Control feature, failed to forward the image log to the server.
Set the forwarding rule for image logs from the server to the machine.
016-509 When using the Image Log Control feature, failed to forward the image log to the server because the
forwarding rule for image logs from the server to the machine has not been set.
Either set the forwarding rule for image logs from the server to the machine, or set [Transfer Image Log]
to [Disabled].
016-510 When using the Image Log Control feature, failed to forward the image log to the server because the
forwarding rule for image logs from the server to the machine has not been set.
Set the forwarding rule for image logs from the server to the machine.
016-511
016-512
When using the Image Log Control feature, failed to forward the image log to the server because the
forwarding rule for image logs from the server to the machine has not been set correctly.
Confirm the forwarding rule for image logs from the server to the machine.
016-514 An error occurred during processing of an XPS document.
If an error occurred while printing from a driver which supports XPS, print from the application using
another print driver (PCL, etc.)
If an error occurred while direct printing an XPS document (such as ContentsBridge Utility, E-mail, and
Media Print - Text), print using the print driver (PCL, etc.) from XPS Document Viewer.
Note
• XPS stands for XML Paper Specification.
016-515 There was insufficient memory during processing of an XPS document.
Take one of the following measures:
• Set [Image Quality] to [Standard]
• Print using the print driver (PCL, etc.) from XPS Document Viewer.
Note
• XPS stands for XML Paper Specification.
For more information on [Image Options], refer to the help of the print driver.
016-516 The Print Ticket included in the XPS document includes an invalid description or a print setting not
supported by the machine.
Check whether there is a problem with the method of using the application that sent the print job, or
with the content of the print instruction.
If your application usage and print instruction are correct, check with the application manufacturer that
sent the print job for operations of the application, not with Fuji Xerox.
If the error still is not resolved, contact our Customer Support Center.
Note
• XPS stands for XML Paper Specification.
016-517 There is an error in the content described in the PostScript file.
Print with the PostScript driver. Furthermore, modify ProcessColorModel described in the PostScript file
so that the color mode does not change.
016-518 With the PostScript driver, booklet and WaterMark were specified at the same time.
With the PostScript driver, specifying a combination of booklet and WaterMark/UUID is not possible.
Cancel one of them.
Error Code Cause/Remedy
To Next Page
Loading...
Need help?
General
