A.6 Installing the Security Extention Kit 381
Press the control board in as far as it will go.
9. Tighten the screws to secure the control board
in place.
10. Connect the power cord to the printer.
Turn on the printer’s main power switch and power switch.
The installation is now complete.
Next, continue from step 11 enable the Security Extention Kit feature from the control panel.
Important
• Once you install the Security Extention Kit and enable it with the control panel, that Security Extention Kit is not
usable on any other printer.
11. Press the <Settings> button on the control
panel to display the menu screen.
12. Press the < > button until [Admin Menu] is
displayed.
13. Press the < > or <OK> button to select.
[Network/Port] is displayed.
14. Press the < > button until [System Settings]
is displayed.
15. Press the < > or <OK> button to select.
[Audio Tones] is displayed.
Admin Menu
System Settings
System Settings
Audio Tones
To Next Page
Loading...
Need help?
General
