7 Hard disk drive (HDD) / solid state disk (SSD) 117
7.1 Safety notes 117
7.2 Basic information 118
7.3 Handling HDDs or SSDs without installation frame 120
7.3.1 3.5-inch HDD and 3.5-inch installation frame 120
7.3.2 2.5-inch HDD/SSD and 2.5-inch installation frame 122
7.3.3 2.5-inch HDD/SSD and 3.5-inch installation frame 123
7.3.4 EDSFF SSD and EDSFF installation frame 125
7.4 3.5-inch HDD configurations 127
7.4.1 Overview of configurations 127
7.4.1.1 Configuration with up to four HDD modules 127
7.4.2 Installing 3.5-inch HDD modules 128
7.4.3 Removing 3.5-inch HDD modules 130
7.4.4 Replacing a 3.5-inch HDD module 132
7.4.5 Replacing the 4x 3.5-inch HDD backplane 134
7.5 2.5-inch HDD/SSD configurations 138
7.5.1 Overview of configurations 138
7.5.1.1 Configuration with up to eight HDD/SSD modules 138
7.5.1.2 Configuration with up to 10 HDD / SSD / PCIe SSD modules 139
7.5.1.3 Configuration with rear HDD/SSD cage 139
7.5.2 Installing 2.5-inch HDD/SSD modules 140
7.5.3 Removing 2.5-inch HDD/SSD modules 142
7.5.4 Replacing a 2.5-inch HDD/SSD module 144
7.5.5 Installing 2.5-inch PCIe SSD modules 146
7.5.6 Removing 2.5-inch PCIe SSD modules 149
7.5.7 Replacing a 2.5-inch PCIe SSD module 151
7.5.8 Replacing the 8x 2.5-inch HDD backplane 152
7.5.9 Replacing the 10x 2.5-inch HDD backplane 158
7.5.10 Replacing the SAS expander board 162
7.5.11 Upgrading with rear HDD/SSD cage 166
7.5.12 Replacing the rear HDD/SSD backplane 169
7.6 EDSFF SSD configurations 174
7.6.1 Overview of configurations 174
7.6.1.1 Configuration with up to 32 EDSFF SSD modules 174
Content
RX2530 M6 Upgrade and Maintenance Manual
To Next Page
Loading...
