Fujitsu PRIMERGY RX2530 M6

15 Serial interface 337
15.1 Safety notes 337
15.2 Installing the serial interface 337
15.3 Removing the serial interface 340
15.4 Replacing the serial interface 343
16 System board and components 345
16.1 Safety notes 345
16.2 Basic information 345
16.3 CMOS battery 346
16.3.1 Replacing the CMOS battery 346
16.4 Trusted Platform Module (TPM) 349
16.4.1 TPM kit 349
16.4.2 Position of the TPM 349
16.4.3 Installing the TPM 350
16.4.4 Removing the TPM 353
16.4.5 Replacing the TPM 358
16.5 iRMC microSD card 360
16.5.1 Note for embedded Lifecycle Management (eLCM) 360
16.5.2 Installing the iRMC microSD card 360
16.5.3 Removing the iRMC microSD card 362
16.5.4 Replacing the iRMC microSD card 363
16.6 M.2 SSD 364
16.6.1 Slots and bolts for M.2 SSDs 364
16.6.2 Installing an M.2 SSD 365
16.6.3 Removing an M.2 SSD 369
16.6.4 Replacing an M.2 SSD 371
16.7 Dual microSD 64GB Enterprise 372
16.7.1 Position of the Dual microSD 64GB Enterprise 372
Content
RX2530 M6 Upgrade and Maintenance Manual