Preliminary steps
▶
"Suspending BitLocker functionality" on page 75.
▶
If applicable, "Removing the front cover with lock" on page
48.
▶
"Shutting down the server" on page 48.
▶
"Disconnecting the power cord" on page 49.
▶
"Getting access to the component" on page 52.
▶
Remove the corresponding riser module, see "Removing a riser module" on
page 69.
Removing the slot cover
Figure 139: Removing the slot cover - example riser module 1
▶
Remove the slot cover.
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
Expansion cards and backup units
220 Upgrade and Maintenance Manual RX2530 M6
To Next Page
Loading...
